Power and Energy Measurement

Home > Optical Instrumentation > Power and Energy Measurement

Products

Newsletter

Sign up for our newsletter to receive the latest information about products, markets and technologies.
Click here

Power and Energy Measurement 186

Power Meter Power Meter with Oscilloscope Function Hand-held digital meter for measurements of power and energy Graphical and digital display for: average optical power pulse peak power pulse energy ... Power Meter Packages Power Meter packages Power meter Packages Save up to 15% compared to single unit prices: ... Energy Meters Scientech Energiemessköpfe Apertures: 2 - 50,8 mm Spectral range: 0.2 - 11 µm Max. Power: 1 - 10 W Max. Energxy Density: 30 mJ/cm² -12,6 J/cm² Noise Level: 4 - 16 µJ Noise ... Power & Energy Meter Laser Power and Energy Meter, 4-Pi A Benchtop-Multitalent for Energy- and Powermeasurements Engineers who spend most of their time in the lab and need multi-function and sophisticated ... Laser Enrgy and Power Meter, PLUS Low Cost Digital Display for Thermal Heads The LPT-PLUS has been structured in its only apparent simple design to match a very broad range of applica... Measuring Heads mW Thermal Head, 10 µW - 200 mW A Strong Alternative to Photodiodes With a flat spectral curve from UV to IR and a greater aperture than the ones of photodiodes this thermopile head... Photodiode, Ge, 50 mW + Sensor-Type: Germanium + Calibration Accuracy: ± 5 % + Resolution: 0.1 µW + Spectral Range: 0.7 - 1.8 µm + Max. Power: 50 mW + Min. Power: 1 µW + M... Silicon photo diode sensor + Detector-Types: Silicon + Calibration Accuracy: ±5 % + Spectral Range: 0.4 - 1.1 µm + Resolution: 0.1 µW + Max. Power: 50 mW + Min. Power: 1 µW + Ma... Photodiode, UV, 50 mW + Detector-Type: UV Extended Silicon + Calibration Accuracy: ±5 % + Spectral Range: 0.2 - 1.1 µm + Resolution: 0.1 µW + Max. Power: 50 mW + Min. Power... Photo diode sensor, VIS, Silicon + Silicon Photodiode Head + VIS Range: 400nm-1100 nm + 10 µW - 500mW + Resolution: 1 µW + Light Duty Stand Included Valid meter: only LPT-4PI ... Photodiodes, 1 µW-500 mW Photodiodes Typical Applications: Biomedical Cytology Alignment Measurement of Losses Features: Detector-Types: Silicon, Germanium Calibration Acc... Measuring Heads kW Laser Point Leistungsmesskopf bis 1,5 kW High power Messkopf für Laser Power und Energy Meter der Serie LaserPoint Max. Continuous Power: 1,5 kW Intermittent Power Use: 2,2 kW Linearity: ±1%... Best High-Power Coating "SHC" The SHC is a real high power coatings. Performances of SHC are stunning and definitely place it to be the best laser coating available on the market. ... Messkopf, 6 kW, wassergekühlt High power Messkopf für Laser Power und Energy Meter der Serie LaserPoint Max. Continuous Power: 6 kW Intermittent Power Use: 9 kW Linearity: ±1% Sen... Thermopile Messkopf bis 3 kW, D55 High power Messkopf für Laser Power und Energy Meter der Serie LaserPoint Max. Continuous Power: 3 kW Intermittent Power Use: 4.5 kW Linearity: ±1% S... Water cooled heads, 1 - 6000 W Watercooled thermal heads up to 6 (9) kW Features: Resolution: 100 mW Apertures: 40 mm & 55 mm Response time: 2 s bzw. 2.5 s Linearity: ± 1 % Accura... FIT measuring head, 6 KW You are going to need a read-out box in order to run the head Features of FIT-Series: + Fast Integrative Thermopile + no water cooling needed + very ... Laser Point probe head, 3 KW You are going to need a read-out box in order to run the head Features of FIT-Series: + Fast Integrative Thermopile + no water cooling needed + very ... Measuring Heads W measurement head, 600 W, air cooled The Laser Point power meter of the serie LPT-A-600 can be used for laser powers up to 200W and for a limited time up to 800 W. There are different dim... Laser Point power head, 40 W, air cooled The Laser Point power meter of the serie LPT-A-40 can be used for laser powers up to 40W and for a limited time up to 60 W. The version LPT-A-40/200 c... measurement head, 200 W, air cooled The Laser Point power meter of the serie LPT-A-200 can be used for laser powers up to 200W and for a limited time up to 250 W. There are different dim... Leistungsmesskopf, 600 W, wassergekühlt Heads from Laser Point of the serie LPT-W-600 measure up to 600 W continous (800 W intermediate). Two different coatings are available: HPB, SHC. Com... Laser Point power head to 10 W Air-cooled measuring head Max. CW achievement: 10 W Overload > 2 min: 15 W Min. dissolution: 10 mW Min. single pulse energy: 5 mJ Max. power density: ... Thermal Heads for Pulsed Lasers Thermal heads with Volume Absorber for Pulsed Lasers Features: Resolution: 10 mW / 10 mJ Linearity: ± 1 % Response time: 3 s NEP: ±250 µW bzw. ±4 m... Water cooled heads, 200-600 W Water coolder thermopile heads up to 600 (800) W Features: Water coling: 1.5 l/min - 3 l/min Sensitive diametern: 40mm - 70 mm Dynamic range: 200 W ... Air cooled heads, 100 µW - 600 W Air cooled thermopile heads up to 600 (900) W Features: Passive ord oder active air cooling Sensitive Diameter: 12 - 60 mm Dynamic range: 100 µW - ... Laser Point probe head, 200 W You are going to need a read-out box in order to run the head Features of FIT-Series: + Fast Integrative Thermopile + no water cooling needed + very ... Laser Point FIT head, 50 W You are going to need a read-out box in order to run the head Features of FIT-Series: + Fast Integrative Thermopile + no water cooling needed + very ... Laser Point Thermopile head to 200 W For all CW laser water-cooled Max. CW achievement: 200 W Overload > 2 min: 300 W Min. dissolution: 10 mW NEP: 23 mW Max. power density: 4 kW/cm^2 (for... Laser Point FIT head, 500 W You are going to need a read-out box in order to run the head Features of FIT-Series: + Fast Integrative Thermopile + no water cooling needed + very ... Systems with PC Connection USB-Detectors (PC-PLUG) Laser Power Detectors with direct PC Interfacefrom Laser Point Laser Point is introducing the next generation of laser power measurement instruments... USB-Converter for Detectors Detector-to-USB Interface for all Laser Measurements The PC-Link a smart head to USB interface and converts any PC or laptop into a power or energy ... Handheld Probes Handheld powermeter, 0.15-10 kW Fully automatic handheld powermeter for high-power laser Features: Response Timet: 8 s Accuracy: ± 4 % Repeatability: ± 2 % (5 %) Max. Temperatu... Handheld power probes up to 10 KW Sondas-termopilas de mano LPT-Cronos para medida de potencia de láseres hasta 10 KW Son ideales para aplicaciones en que no se deben realizar medida... Handheld power probes up to 500 W Sondas-termopilas de mano LPT-Fit para medida de potencia de láseres hasta 500W Son ideales para aplicaciones en que se deben realizar medidas duran... Handheld powermeter, 0.5-500 W Fully automatic hand-held powermeter for low-power laser Features: Response Time: 4 s Accuracy: ± 3 % Repeatability: ± 1 % Max. Temperature: 70 ... Laser Point Probe, 10 kW For Nd:YAG and Co2 laser (switchable) alternatively also for diode lasers (please when ordering indicate) Max. measurable achievement: 10 KW Min. mea... Laser Point Probe, 5 kW For Nd:YAG and Co2 laser (switchable) alternatively also for diode lasers (please when ordering indicate) Max. measurable achievement: 5 KW Min. meas... Laser Point Probe, 1.5 kW For Nd:YAG and Co2 laser (switchable) alternatively also for diode lasers (please when ordering indicate) Max. measurable achievement: 1.5 KW Min. me... Laser Point Probe, 500 W Complete mesurement solution for easy to handle and precise power results Specification: + max. power: 500 W + min power: 5 W + max. irradiance: at 1... Laser Point Probe, 200 W complete mesurement solution for easy to handle and precise power results Specification: + max. power: 200 W + min power: 2 W + max. irradiance: at 1... Laser Point Probe, 50 W Complete mesurement solution for easy to handle and precise power results from Laser Point Specification: + max. power: 50 W + min power: 0,5 W + max... IPL IPL energy-meter up to 350 Joule Energymeter for IPL Fit-IPL-R is a fully automatic, hand-held energy and power meter designed for IPL (Intense Pulsed Light) applications. Fit-IPL-... OEM Components OEM Thermopile Messscheibe bis 50W LaserPoint OEM Sensor Max. CW power 50 W range: 15 mW bis 50 W coating: BBF Sensitive diameter 20 mm dimenstions: diameter 44 mm, thickness 3 mm... Fast OEM Thermal Heads OEM Fit-Detectors The Acronym "Fit" stands for Fast Integrative Thermopile. These detectors have a slim-design and need no water cooling even when wo... OEM Thermal Heads with integ. Amplifier Thermal OEM-heads with an integrated Amplifier Typical Applications: Measurements of Laser or system performance Feedback to Laser/system control... Standard OEM Leistungsdetektoren Thermische OEM-Messköpfe Die folgende Tabelle bietet eine Auflistung der am häufigsten verkauften Standardkomponenten. Wenden Sie sich bitte an unse... OEM Thermische Sensor-Scheiben OEM-Sensor-Disks OEM Sensor-Disks von LaserPoint sind hochempfindliche, niederohmige Thermopiles mit einem hohem Linearitätsgrad. Hohe Empfindlichke... OEM sensors Power and long pulse energy sensors in OEM formats Laser Point y Laser 200 ponen a su disposición una amplia gama de sensores en tres formatos OEM: -... Laser Point OEM Thermopile disk to 50W Max. CW achievement: 50 W Capacity range: 15 mW to 50 W Wavelength coverage: 190 nm to 25 µm, and/or 250 nm to 11 µm depending upon coating Max. power... Laser point OEM Thermopile disk to 50W Max. CW achievement: 50 W Capacity range: 15 mW to 50 W Wavelength coverage: 190 nm to 400 nm, and/or 250 nm to 11 µm depending upon coating Max. powe... Laser Point OEM sensor with amplifier with amplifier and housing Max. achievement: 10W Coating: BBF or HCB Max. power density: 2 kW/cm^2 (HCB) 200 W/cm^2 (BBF) Wavelength coverage: 190 nm... Laser process monitor, Cased Version OEM process monitor in a metal housing LPM is an all-industrial measurement monitor to read power or energy effectively delivered to the work piece ... Laser Process Monitor OEM process monitor LPM is an all-industrial measurement monitor to read power or energy effectively delivered to the work piece . Electronics can ... Replacement and calibration Exchange sensor for measuring heads of the series of LPT (LaserPoint) including a calibration For the change of damaged sensors of the measuring head... Laser Point OEM Sensor with amplifier #2#Max. Continuous Power#200 W# Max. Energy#200 J (long pulses)# Outer Dimensions#44 mm(Dia) x 6mm (Thick)# Sensitive Diameter#20mm# Available Absorbe...