Selection
Polarization Preserving Beam Sampler
The Polarization Preserving Beam Sampler (PPBS) uses a dual wedge design to sample a small percentage of a beam’s power for laser beam profiling applications.
Miniature beam profiler
This extremely compact laser beam profiler, with a housing depth of only 6.5 mm, allows measurements even in hard to reach places.
2-16 micron Laser Beam Analyzer
The beam analysis camera WinCamD-IR-BB with integrated microbolometer array enables analyzes on long-wave lasers in the range of 2 μm to 16 μm.
Mutlispectral THz Camera
Laser Beam Profiler, which is ideally suited for multispectral THz laser beam analysis in the range of 3 THz to 20 THz.
Laser Beam Profiler WinCamD-LCM
This laser beam profiler features a CMOS sensor that guarantees frame rates of up to 60 Hz with high dynamics and is suitable for large beam diameters up to 11 mm.
Beam Profiler BladeCam-XHR
The BladeCam-XHR combines an extremely compact design (housing depth of only 6.5 mm) with a very high resolution of the sensor.
BeamR, rot. Single Plane Scan
The scanning system BeamR with rotating slots for the measurement of lasers with diameters of 0.5 microns to about 3 mm
Laser Beam Profiler, 20 mm x 15 mm
Laser beam profiler with fiber optic taper for characterizing large laser beams up to 20 mm x 15 mm.
Laser Beam Profiler, 6,5 mm x 4,8 mm
Proven laser beam profiler system with low-noise CCD sensor. Especially suitable for the measurement of small laser beams.
Multi Plane Scanning System BeamMap
Based on the patented multi plane scanning technology the scanning system the BeamMap allows the measurement of focal position, beam diameter (according to ISO 11146), divergence and the M2 factor of different focussed cw or qcw laser beams in real time.
Miniature beam profiler
Extended version of the proven WinCamD with increased sensor resolution.
Laser Beam Profiler, 7.1 mm x 5.4 mm
Extended WinCamD version with the highest resolution of this product family.